My Garage
My Account
Cart
Genuine Infiniti G35 Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Door Lock Cylinders found
Infiniti G35 Cylinder Set-Door Lock,LH
Part Number: H0601-JK60A$218.22 MSRP: $319.96You Save: $101.74 (32%)Ships in 1 Business Day
Infiniti G35 Cylinder Set-Door Lock,L
Part Number: 80601-AM800$237.63 MSRP: $348.44You Save: $110.81 (32%)Ships in 1-2 Business Days
Infiniti G35 Door Lock Cylinder
The Infiniti G35 Door Lock Cylinder allows drivers to lock or unlock their coupe or sedan by simply turning the original metal key. The internal latch on the front door is directly linked to the Door Lock Cylinder that sits right in the door. A smooth twist immediately turns locked or unlocked. This Door Lock Cylinder gives the G35 a reliable mechanical backup when intact as newer vehicles drop the exterior key slot. Over the years, the model relied on a traditional single keyed Door Lock Cylinder on each front door, while later trims fitted that familiar hardware with remote entry electronics, allowing Infiniti G35 owners to toggle between button convenience and the tactile reassurance of a key turn. The arrangement conforms to Infiniti's attention to driver confidence while retaining the classic touch that many fans appreciate. Using the Door Lock Cylinder every day causes friction that wears out the tumblers and springs inside. This can cause the cylinder to move stiffly, get stuck, or not turn at all. Renewing this part restores crisp function for the G35, making it safe to drive.
Wondering where to find exceptional quality and economically-priced OEM Infiniti G35 Door Lock Cylinder? You are at the proper online store. We offer all genuine Infiniti G35 Door Lock Cylinder with a manufacturer's warranty at unbeatable prices. Order now and you can get brand-new parts at your door step with our fast shipping times.
Infiniti G35 Door Lock Cylinder Parts Questions & Experts Answers
- Q: How to remove and reinstall the Door Handle and Door Lock Cylinder on Infiniti G35?A:First, to gain access to the door trim panel, it has to be pulled out then the door window glass is to be removed, then the window glass module assembly. Next, remove the door latch actuator rod from the handle and then the nuts or screws getting the latch out of the door and so finally the whole latch assembly will be detached. In case of their reinstallation, the manner should be commensurate and in the reverse order of that used in the removal process. Again perform the process of unbolting the door trim panel, the door window glass, and the assembly of window glass module. To disarm the outside handle, it is required to release the connection between the door latch actuator and the handle, extract the fasteners of the outside handle, and pull out the handle from the door before finally fixing it back through the reversal of the procedures followed.
