My Garage
Cart

Genuine Infiniti M30 Fender

Wheel Fender
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fenders found

  • Infiniti M30 Fender - 63101-F6635
    Diagram for Infiniti M30 Fender - 63101-F6635
    View related parts
    Product Specifications
    • Other Name: Fender-Front,LH; Fender
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | Base, STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 63100-F6635
    Diagram for Infiniti M30 Fender - 63100-F6635
    View related parts
    Product Specifications
    • Other Name: Fender-Front,RH; Fender
    • Position: Passenger Side
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | Base, STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 78113-F6638
    Diagram for Infiniti M30 Fender - 78113-F6638
    View related parts
    Product Specifications
    • Other Name: Fender-Rear,LH; Outer Panel
    • Manufacturer Note: W/RETAINER D/LOCK
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 78113-F6635
    Diagram for Infiniti M30 Fender - 78113-F6635
    View related parts
    Product Specifications
    • Other Name: Fender-Rear,LH
    • Position: Driver Side
    • Replaced by: 78113-F6636
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | Base, STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 78113-F6630
    Diagram for Infiniti M30 Fender - 78113-F6630
    View related parts
    Product Specifications
    • Other Name: Fender-Rear,LH
    • Position: Driver Side
    • Replaced by: 78113-F6636
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990 Infiniti M30 | Base, STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 78112-F6638
    Diagram for Infiniti M30 Fender - 78112-F6638
    View related parts
    Product Specifications
    • Other Name: Fender-Rear,RH; Outer Panel
    • Manufacturer Note: W/RETAINER D/LOCK
    • Position: Passenger Side
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | STD | 6 Cyl 3.0L EGI | VG30E
  • Infiniti M30 Fender - 78112-F6630
    Diagram for Infiniti M30 Fender - 78112-F6630
    View related parts
    Product Specifications
    • Other Name: Fender-Rear,RH
    • Position: Passenger Side
    • Replaced by: 78112-F6631
    • Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
    Fits the following Vehicles:
    • 1990-1992 Infiniti M30 | Base, STD | 6 Cyl 3.0L EGI | VG30E

Infiniti M30 Fender

The M30 Fender by Infiniti provides reliable protection and smooth aerodynamics that drivers feel every mile. This M30 Fender is positioned at the front and rear wheel arches to prevent stones, mud, and stray debris from chipping paint and threatening traffic. The stamped steel shell of this car reflects distinctive Infiniti design lines and absorbs light bumps. Since all M30s are made with the same chassis throughout the production process, the Fender bolts on with factory accuracy. As a result, there are tight and symmetrical panel gaps. There are two versions, the front quarter panel that hugs the leading edge where gravel strikes hard and the rear quarter panel that stretches toward the trunk. Either way, both Fender designs route air past the spinning tire to reduce drag and quell wind noise. The aerodynamic support allows the Infiniti coupe to stay planted on the highway, helping it slightly save fuel. Hence, the Fender is not just more attractive; it is efficient too. The M30 Fender's arched surface also increases safety by capturing any loose object that may ricochet toward pedestrians and trailing vehicles. When you select an authentic Infiniti part, you can be sure that its metal thickness, corrosion coating, and mounting tabs are matched 100 percent to original specifications, eliminating the potential for rattling or misalignment. Every Infiniti M30 trim is compatible with each other, so a damaged panel from an early build will swap in without complications to a later year. This Fender is differentiated from the rest by its latent strengths of rust-resistant coating, reinforced lip edges, and a well-rolled opening to lend it a high-end look. To summarize, according to the Infiniti M30 faithful, a properly fitted Fender protects the appearance of a vehicle, improves aerodynamics, and makes road safety more effective day after day.

Wondering where to find exceptional quality and economically-priced OEM Infiniti M30 Fender? You are at the proper online store. We offer all genuine Infiniti M30 Fender with a manufacturer's warranty at unbeatable prices. Order now and you can get brand-new parts at your door step with our fast shipping times.

Related Infiniti M30 Parts