How to remove and install the Mass Air Flow Sensor/IAT sensor in the Infiniti G35?

The first thing to do while you are dealing with G35 sedans and 350Z models between 2003-2006 as well as all G35 coupes is disconnect the air intake duct from the MAF/IAT sensor and from the air intake resonator, afterwards pull it out. To do this, depress the release tab that is located at the back of the electrical connector for MAF/IAT sensor. Take off also an air filter housing cover. It should be noted that you will have to remove four bolts when pulling out a MAF/IAT sensor from an air filter housing cover (1984). In case of removal, installation takes place in a reverse order. In case of 2007 and subsequent G35 sedans and 350Z models, you can unplug electric connector from MAF/IAT sensor. Then remove a bolt attaching MAF/IAT sensor and get it out of an air filter housing cover Finally, installation is the reverse of removal.

Genuine Infiniti G35 Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
Infiniti G35 Mass Air Flow Sensor
Part Number: 22680-7S000
$207.51 MSRP: $326.77
You Save: $119.26 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor
- Manufacturer Note: MADE IN JAPAN
- Replaces: 22680-7S00A, 22680-7S00B
- Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
Fits the following Vehicles:
- 2003-2008 Infiniti G35 | Base, Basic, Journey, Leather, Premium, Sport, Sport Premium, Track, X | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L, 6 Cyl 3.7L | VQ35DE, VQ35HR, VQ37VHR
View related parts
Infiniti G35 Mass Air Flow Meter
Part Number: 22680-CA000
$255.51 MSRP: $402.35
You Save: $146.84 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow; Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
Fits the following Vehicles:
- 2003-2007 Infiniti G35 | Basic, Sport, Track | 6 Cyl 3.5L | VQ35DE
View related parts
Infiniti G35 Mass Air Flow Sensor
Part Number: 22680-AM600
$678.98 MSRP: $931.38
You Save: $252.40 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow; Air Mass Sensor
- Replaced by: B2680-AM600
- Warranty: This genuine part is guaranteed by Infiniti's factory warranty.
Fits the following Vehicles:
- 2003-2004 Infiniti G35 | Basic, Track | 6 Cyl 3.5L | VQ35DE

Infiniti G35 Mass Air Flow Sensor

The Infiniti G35 Mass Air Flow Sensor monitors the amount of air that enters the engine so that the electronic control unit can control the delivery of fuel in order to achieve a balanced mixture. Located between the air filter housing and intake manifold, the Mass Air Flow Sensor samples incoming airflow and transforms that information into an electrical signal sent to the powertrain computer. On the G35, its placement ensures that air flows smoothly. The Infiniti component optimizes idle quality and throttle response while enhancing fuel economy. The Mass Air Flow Sensor relies on the sensitive element remaining clean. Any dirt on the sensitive element will give the Mass Air Flow Sensor inaccurate readings. Such inaccurate readings may result in hesitation, stalling, and incorrect air fuel ratios. Checking the air path and the filter helps in safeguarding the Mass Air Flow Sensor from the debris that affects its performance. Since every Infiniti G35 benefits from a correctly operating Mass Air Flow Sensor, a properly working sensor is important in keeping the refinement of the Infiniti G35 driving character.

Wondering where to find exceptional quality and economically-priced OEM Infiniti G35 Mass Air Flow Sensor? You are at the proper online store. We offer all genuine Infiniti G35 Mass Air Flow Sensor with a manufacturer's warranty at unbeatable prices. Order now and you can get brand-new parts at your door step with our fast shipping times.

Infiniti G35 Mass Air Flow Sensor Parts Questions & Experts Answers

Mass Air Flow Sensor
22680-7S000
Q: How to remove and install the Mass Air Flow Sensor/IAT sensor in the Infiniti G35?
A:
The first thing to do while you are dealing with G35 sedans and 350Z models between 2003-2006 as well as all G35 coupes is disconnect the air intake duct from the MAF/IAT sensor and from the air intake resonator, afterwards pull it out. To do this, depress the release tab that is located at the back of the electrical connector for MAF/IAT sensor. Take off also an air filter housing cover. It should be noted that you will have to remove four bolts when pulling out a MAF/IAT sensor from an air filter housing cover (1984). In case of removal, installation takes place in a reverse order. In case of 2007 and subsequent G35 sedans and 350Z models, you can unplug electric connector from MAF/IAT sensor. Then remove a bolt attaching MAF/IAT sensor and get it out of an air filter housing cover Finally, installation is the reverse of removal.